Watch how easy it is to install our piers

These installation videos give you a look at what you'll need to do so that there are no surprises.

Pier of d'Nort Clip & Flip Installation Video

Quick Step by Step

  1. Carry the frame section upside down with legs folded.
  2. Hook frame into the latch on the previous section
  3. Unfold the legs (which should be pre-set to roughly the length you need for your water depth)
  4. Flip the frame section over, with the hook and latch as the pivot point. The frame should land in the water right-side up and looking good.
  5. Place your decking panels and panel clips (if you have them)
  6. Adjust deck height as needed